博文

目前显示的是 四月, 2017的博文

Why Choosing the Hot Dip Galvanized Steel Scaffolding Planks

图片
Hot dip galvanized steel  scaffolding planks  has the fire, light weight, corrosion resistance, alkali resistance and high compressive strength, good appearance, durable and other characteristics. and it is widely used in Shipbuilding, oil, electricity and construction industries. Next, we can from three aspects to discuss its advantage: cost, safety performance and the use of installation. In the cost, it is lower than ordinary wooden steel board. and it is more environmentally friendly. In safety performance, it have corrosion resistance, acid and alkali resistance and can prevent burning. In addition, scaffolding planks i-section on either side of the design and internal embedded steel plate solid welding more increased its strength, 3 meters long scaffolding can take 5-6 people standing at the same time and not deformation, durable. Galvanized steel scaffolding planks is more convenient and quick for installation, same specification scaffolding, steel scaffolding planks certainly i

Points for Erecting Frame Scaffolding and its Accessories in the Construction

图片
Frame scaffolding  is the key to the entire device, therefore in the build-up to observe the erection to better complete the engineering tasks. Below to introduce the scaffold in the points for attention during the erection of the frame frame and accessories:  1, cross support, horizontal plane, scaffolding, connecting rods, arm lock settings should comply with the regulations of structure. Cross support, horizontal plane and scaffolding should follow the installation of the frame set in a timely manner. 2, two different products, frame and accessories shall not be mixed in the same scaffold. Various parts of lock, toggle hook must be in a locked state. Level or scaffold board should be set in same step, scaffolding should be spread. 3, the position of the steel ladder should accord with the requirement of assembly plan, the underlying steel ladder should be set at the bottom of the steel pipe with fastener fasten on the frame of erect stem, both sides of the steel ladder across all sh

The Galvanized Scaffolding Plank Can Ensure Safety

图片
Due to the wooden board, bamboo hidden trouble in security in the building process, prevent slippery effect is poor, less ratio of steel board, therefore has gradually can not adapt to the construction of the domestic industry, steel acaffolding planks is the preferred alternative products. Technical level rising in the building industry at the same time, China's steel Scaffold Boards production enterprise must know the market changes, latest steel plank industry development present situation and trend of development suited to the market and products of different customers, to seize market, rely on their own advantages to innovation actively, continuous efforts, will spur domestic steel Scaffold Boards industry better and faster development.  What advantages Galvanized steel scaffolding have ?  Before the construction site of the most common is the bamboo board, but as a construction site accident happened time and again, bamboo board is gradually replaced by galvanized scaffolding

What is Frame Scaffolding

图片
Tubular metal  frame scaffolding  systems are probably one of the most commonly used scaffold system in the construction industry. The scaffold consists of welded steel or aluminum frames connected by cross braces to orm a framework to support scaffold planks or other scaffold platform systems.  Frames are manufactured in a wide variety of sizes and configurations, the most common being a standard 5 foot by 5 foot frame and walk-through arch or arch frame  The arch frame scaffold is very common in the masonry construction sector as it allows convenient movement between the frames for distribution of materials. Outrigger brackets or side brackets can be installed on the side of the scaffold at varying levels to provide a convenient personnel platform for work at the building face. 

Sturdiness and Durability in Scaffolding Planks

图片
It’s a fantastic sight to watch accurately erected scaffolding. All the frame pieces and cross members adjust flawlessly. If  scaffolding planks  are found to be substandard then even impeccably build framework is next to useless. Keep in mind, workers stand on the platform, so it must be robust, dependable, and secure. Scaffolding Planks Support Besides providing support for the scaffolding planks, they provide a secure foothold for everybody, be it a skilled at-height employee or a visiting inspector. Thus, this artificial flooring, although thin, ought to fulfil certain standards. Mainly, the material has to be thick enough and adequately strong to support the entire weight of any construction materials or tools that are placed on that platform and the workers. Importantly, it must be set up in such a way that it removes uneven surfaces if any. Fastener heads or projecting plank edges aren’t allowed because these defects bring in a possible trip hazard. Appropriately Adjoined Planks

Do You Know How to Maintain the Frame Scaffolding in A Right Way

图片
Scaffold is used in construction scaffolding, one of the most widely used of the scaffold. Because the frame show "frame" word, so called the frame or gate type scaffold, also known as  frame scaffolding . The scaffold is mainly composed of main frame, horizontal box, cross brace, scaffolding, adjustable base, etc. Frame scaffolding first developed by the United States, it has the tear open outfit simple, bearing performance good, safe and reliable use, etc, are developing fast.     Frame scaffold although on the service life of 5 to 8 years, had begun to make the frame early s scaffold, frame scaffolding is used in construction scaffolding, one of the most widely used of the scaffold.     First developed in the United States, the frame scaffold has the tear open outfit simple, good bearing capacity, the use of safe and reliable, and so on characteristics, development is very fast. Frame scaffold has grown, the problem has been slowly changing.    Use frame scaffold had subse

What Are the Components of Frame Scaffolding in the Scaffolding System

图片
Frame scaffolding  door type shelf, therefore is called the door frame, referred to as a door or gate type scaffold, also known as scaffolding of frame. Frame scaffolding main parts is the door frame, cross support, connecting rod, hanging button scaffolding or horizontal planes, arm lock and so on basic structure, set up horizontal reinforcing rod, bracing, sweeping bar, sealing bar, bracket and base, and uses the even wall connected to the main body structure of a standard steel tube scaffold. The main parts are these doors scaffold. Buy a set of complete frame scaffold, main is to see these accessories, door scaffold of the long history, is due to the scaffold before part name, each has a name, bring great inconvenience to the popularization and application of scaffolding. scaffold So far there has no uniform design and product standards, product specification is different, quality is not consistent.   Not only to bring considerable difficulties in the use and management of construc

What Are the Benefits of Steel Scaffolding Planks

图片
As a construction scaffolding, steel  scaffolding planks  presented very fast in recent years the development of the momentum, the overall development tendency to two main aspects, the first is the "good bearing, easy to install," the second is the "light weight", in fact the two features for steel scaffolding planks is understandable. The first requirement: good bearing, the hard measure of steel board, only very good bearing, more by the market, only safe and convenient installation process and design, to maximize the get the favor of consumer. The second requirement: light weight, that is, we say "lose weight", the first such steel scaffolding planks for more convenience of transport, during the installation process at the same time, more lightweight building materials can be suitable for some special construction environment, such as high-level, stadiums, shopping malls like these buildings. It is said that after "lose weight" steel scaffoldi

What Is the Safety Requirements of Frame Scaffolding When Erecting

图片
The scaffold before use should by the examination and acceptance of construction site, head of the organization, and present the single fill in the acceptance of rear can use. In construction process should have professional management, inspection and maintenance, and regular settlement observation, found abnormal should take timely reinforcement measures. Frame Scaffolding  demolition, it shall first check connections and buildings, and the remaining on the scaffold material, debris and other clean, from top to bottom, according to the loading before, after the first open order, demolition of the material should be unified transfer or hanging down to the ground, step by step. Are not allowed to step down the method, it is forbidden to throw down or push (la) and fall for. Take down the Frame Scaffolding,alert zone should be set up, and hold people alert. In case of more than 6 wind and bad weather, should stop Frame Scaffolding demolition work. Demand of the foundation, the foundation

Steel Scaffolding Planks Can Maximize to Ensure Workers Safety

图片
Scaffolding planks  can generally called steel scaffolding, steel construction steel scaffolding planks, pedal steel, galvanized steel scaffolding planks, hot dip galvanized steel pedals, deeply the general shipbuilding, oil platform, electric power, construction steel pedals used widely in the production of construction industry acclaim and was.  Steel board with fire prevention, prevent many sands, light weight, corrosion resistance, alkali resistance and high compressive strength, etc. Jump steel plate, carbon steel cold will be chosen to make through hot galvanizing technology, the use life of up to 5 to 8 years. Steel scaffolding planks of production has a great significance to the construction of social development, do not ignore the value of its existence.   In order to ensure the smooth development of building construction, construction steel pedals production will have to choose good quality steel scaffolding planks, this is not only responsible for the workers, is responsible

Shinestar opened 2017 new staff factory tour

图片
Recently, Under Shinestar holdings group careful organization , Induction of 2017 new employees to visited Shinestar factory in changsha yili logistics park ,opened up a meaningful "factory tour. It is reported, Shinestar holdings group each year for new recruits to conduct orientation, debate, business training and visit the factory and a series of training activities. This fully expressed Shinestar of attention and expectations for new employees, encourage you as soon as possible into Shinestar of this big family, and with the right attitude and positive way to improve themselves, to open a new career. This is one of the most characteristics "factory tour”activities. Shinestar holdings group as the iron and steel industry good production supplier, product has been our vital lifeline. Through a close feeling of the production line, combining theory and production practice, let the couple of steel products and industry have a profound understanding of, their busine

Three New Trends of the World Steel Industry Technology

图片
Currently, with the development of a new round of revolution of science and technology and industry, the world steel industry technology development has a new trend accordingly. As welded steel pipe, line pipe, carbon steel pipe, galvanized pipe,  scaffolding plank , and other products production services vendors, Shinestar Holding group have been focused on the Firtly,steel manufacturing process is efficient, green and renewable After the United States, Europe, Japan has announced that the iron and steel industry technology development goal will be efficient, environmental protection technology, the research and development should focus on the process improvement and development, which can deal with some issues, such as resources, energy, environmental protection and recycling, and to meet the needs of customers for product development and application of the technology research. Among them, the U.S. Implement carbon dioxide emissions by increasing energy efficiency; The EU has investe

What Is the Best Way to Set Up High Level Frame Scaffolding in Projects

图片
Adopted by the build-up of high-level  frame scaffolding ,all must meet the quality requirements of various materials. High-level frame scaffolding foundation must be strong, before the erection of the computation, meet the requirement of load, and set-up, and according to the construction of drainage measures. Frame scaffolding, technical requirements should comply with the regulations of relevant specification. Must attach great importance to all kinds of structural measures: bridging, node, etc. Shall be set up according to requirements. Level is closed: should be the first step, every step or two steps, be put with frame scaffolding plank hand or foot basketry, frame scaffolding to laid along, overlapping joint should be shelved in a small bar, it is forbidden to appear short board. And in every four step laid between stud and wall system bottom has long security. Vertical closed: mobile frame scaffolding safety requirements in the second step to step 5, each step all needs to the

Steel Scaffolding Planks Are Cheaper Than Other Scaffolding Planks

图片
Steel  scaffolding planks  and steel boards should pass strict testing steel scaffolding planks, also called steel scaffolding planks, are a kind of portable new steel scaffolding. Foot pedal (ramp) is used in construction, energy, chemical industry, shipbuilding and other construction projects that is commonly used in construction equipment, it is a pedal instead of bamboo products, one third than the old steel scaffold board weight. In the construction site to fire prevention, environmental protection, more safe. In the eighty s, the national construction project starts with steel and wood, bamboo scaffold board and wooden planks began to gradually replaced by steel scaffolding, the current steel scaffolding planks standards, is a former ministry of metallurgical industry of YBJ211-1988. Steel scaffolding planks A. look and welding requirements: with visual inspection by quality inspection personnel. B. overall dimensions: use the steel tape measure. C. raw materials requirements: ea

Tips for Setting Frame Scaffolding and Its Accessories in the Projects

图片
1, cross support, horizontal plane, scaffolding, connecting rods, arm lock settings should comply with the regulations of structure. Cross support, horizontal plane and scaffolding should follow the installation of the frame set in a timely manner. 2, two different products, frame and accessories shall not be mixed in the same scaffold. Various parts of lock, toggle hook must be in a locked state. Level or scaffold board should be set in same step, scaffolding should be spread. 3, the position of the steel ladder should accord with the requirement of assembly plan, the underlying steel ladder should be set at the bottom of the steel pipe with fastener fasten on the frame of erect stem, both sides of the steel ladder across all should set up handrail. Each ladder can step across two or three steps frame again turn. 4, frame scaffolding  does not need special maintenance, maintenance. The frame scaffolding components to eliminate the bolt connection, artifacts by touch upon, the whole su

Hot Dipped Galvanized Scaffolding Planks Will Be the Mainstream

图片
Hot galvanizing technology of steel  scaffolding planks  for future mainstream treatment method, hot dip galvanized steel after surface treatment is the main material of the future as scaffolding planks!  With the rapid development of high-rise buildings, hot dip galvanized surface treatment of steel scaffolding planks external scaffold are also constantly updated, the scaffolding strap is because the price is low, the traditional way to build a cheap wood, in the construction process of construction, ride around is full of the scaffold (board), the whole building is completely surrounded by the dense closed environment fire buried hidden trouble.   The flammability of bamboo (wood)scaffolding planks is the culprit of fire, a cigarette could lead to failure of major fire accident. How to effectively prevent the fire? Steel structural steel scaffolding planks research successful experience tells us: the safest scaffolding material or steel plate, instead of steel walking plate can be el

Do You Know the Components of Frame Scaffolding in the Whole System

图片
Frame scaffolding  connection structure, including scaffolding, connecting rods and safety pin, among them with the top of the scaffold erection rod have connecting rod, connecting rod connection hole is open, the door of the scaffold erection rod has to match the connecting rods of the bottom connection hole, up and down the scaffold connection, connection of the bottom of door frame stud hole to match the connection rods connection hole, connecting hole interpolation has a safety pin. The utility model has simple structure, easy to use, because the connecting rod is welded on the door frame with the top of the vertical rod, so will not be lost during disassembly, fluctuation scaffold after assembly at the same time. 1. The cross support Cross sustaining is longitudinal connecting every two pieces of door frame type cross rod. Two cross bars in the central round hole is drilled, bolted, rotating for transportation and installation. Bar pressure on both ends of the flat part of the pin

Scaffolding Prop Advantages

图片
We have emerged as one of the most profound manufacturers of Scaffolding Props in China. Basically seen at construction sites, all these  Scaffolding Prop  are widely used for supporting buildings and large structures. Fabricated from best quality steel, our stock of props is highly durable in terms of proficiency. With the World scaffolding exports Scaffolding Prop, one can reduce the cost incurred as these props are reusable and used to support formwork shuttering. As it has no loose part, the prop can be erected easily in short span of time. There is a threaded external tube in combination with an internal tube with intermediate holes in order to give the desirable extended size required by the application. These scaffolding props are considered as the ideal and the most economic method for supporting all kinds of formwork, slabs, beams, wall and columns. Due to their telescopic features and easy handling, all our props eliminate the labor work and the time consumed in cutting timbe

Why Using Galvanized Steel Board in Shipbuilding Industry

图片
In recent years, with the rapid development of China’s major coastal ports, as well as the fast growth of foreign exports, the demand for ships is also growing, so the shipbuilding industry also will be developed quickly. But in the ship construction process, we almost can not bamboo plank and wooden plank. The shipbuilding industry is generally used marine galvanized steel board. Why is that? There are many reasons. Different from ordinary construction, production environment have a larger impact on shipbuilding industry, and the usage of various materials, facilities and other requirement have a certain particularity. As we all know, China’s shipbuilding production base is mostly in the gulf, estuary, there areas is  heavy with moisture so that bamboo and wood is easy to corrode or mould. In addition, in the ship manufacturing process, often need to use the welding process. Bamboo plank and wooden plank is easy to burn because of material reason. While World Scaffolding production of

Quick Tips for the Use of Scaffolding

图片
Scaffolding construstion has been a need these days because of the significant upgardation of foundations in and around the spot furthermore because of a considerable measure of new developments happening all over the place. As in the later times high rises are in pattern so the requirement for solid and secured platform administrations through an endorsed builder is an absolute necessity. Enlisting a Contractor To utilize safe  frame scaffolding  you have to contract an authorized platform builder for the best system. The builders ought to stick to the administrative wellbeing enactment and the OHS demonstration and SANS 10085 with the goal that he is guaranteed to give the ideal security amid the operation and thus will keep away from indictment for mishaps or passing. Platform Safety Preparation Prior to the whole structure is setup a builder should be guaranteed of specific things which are: Firstly, the level where the structure will be set up must be plain. On the off chance that

Tower-Frame Scaffolding

图片
Tower- frame scaffolding  is a particular form of prefabricated scaffolding. They incorporate fabricated frame units constructed as single-bay towers. Mobile tower-frame scaffolding is mounted on castors for ease of relocation between uses. Who can erect and dismantle tower-frame scaffolding? If the fall-height from the scaffold’s top working platform will be more than 4 metres, anyone erecting, altering or dismantling the scaffold at a workplace must hold an appropriate scaffolding certificate of competency, or be a trainee under the direct supervision of a certificate holder. The minimum nationally uniform certificate class required is basic scaffolding (class code SB). A certificated scaffolder directly supervising a trainee must be specifically authorised by the employer to oversight the trainee. If the fall- height from the top platform will not exceed 4 metres , then a person who has been adequately trained and instructed in the erection and dismantling of that brand and model of

Four Notes on Security When Using Scaffolding Plank

图片
• Scaffolding planks  must be positioned so that no single gap between planks exceeds 25 mm and the total gap between all planks does not exceed 50 mm. •Planks must overhang their support by at least 150mm but no more than 250mm otherwise uplift might occur. •Where planks are overlapped, the overlap past the edge of the plank underneath must be 300mm or greater. •Where metal planks are lapped onto metal planks they must be secured with double tie wire or strapping.

The Tips of Erecting and Dismantling Frame Scaffolding

图片
• Frame scaffolding  with a platform height of less than 4m must only be erected, dismantled or altered by a competent person or under the supervision of a competent person. •Frame scaffolding with a platform height of 4m or over must only be erected, dismantled or altered by a person who holds a Basic Scaffolding (or higher) certification or under the supervision of a person who holds a Basic Scaffolding (or higher) certification. •Where a person on a scaffold structure could fall at least 3m for housing construction work or at least 2m for non housing construction work, the scaffold structure must have fall prevention measures in place. •Where a person erecting, dismantling or altering scaffold could fall at least 3m for housing construction work or at least 2m for non housing construction work, a solid platform must be provided under the person to prevent a fall exceeding these distances. •The site shall be inspected before erection to ensure the correct and safe use of Frame Scaffo