The eight points let you easily master the scaffolding acceptance criteria

The eight points let you easily master the scaffolding acceptance criteria

Scaffold project acceptance criteria is mainly manifested in the following aspects:

1, scaffolding to the quality of the materials used must meet the requirements.

2, scaffolding foundation is solid, not water, conform to the requirements of the plate.

3, the length of the main rail level error must not exceed 6 cm. Poling vertical deviation shall not be less than 1/200 of the rack high, small long rail deflection is not more than 1/150, bar spacing interval comply with the design requirements.

4, to have enough points, even wall set a vertical distance every 4 m, level set a distance of 6 m, and firm, reliable, and buildings.

5, strict operation layer planking, flat and stable, want to hand in the corner circle put scaffold board (i.e., the vertical and horizontal scaffolding plank pressure received). Planking length width in place, can not have probe plate. Scaffolding material meets the requirements.

6, surface protection, safety net and block feet or tied two protective railings, add 18 cm foot, surface end block.

7, safety nets, want to have the factory quality certificate and test certificates, for flat screen to the observed low, two lap, to receive strength evenly. Set net and the main rail binding is firm, set net bottom pressure under the quanlity-guaranteed scaffold board.

8, external scaffolding, must go through the inspection of qualified acceptance signature that can be put into use. Layering do, build-up, layering, acceptance and use, found that the problem timely reinforcement.