Design data structure: fastener type steel pipe scaffold lateral horizontal pole set-up

Design data structure: fastener type steel pipe scaffold lateral horizontal pole set-up
(1) the erection of lateral horizontal pole should comply with the regulations of the structure of the specification.
(2) double row scaffolding lateral horizontal distance on the surface of the rod side against the wall to wall decoration should not be greater than 100 mm.
(3) single row scaffolding lateral horizontal pole should be not installed in the following parts:
1) design is not allowed to keep the foot hand-eye.
2) on the lintel and lintel ends into 60 ° Angle of the triangle range and lintel net span half the height of the range.
3) the width of the wall between the Windows of less than 1 m.
4) beam or girder under the pad and its 500 mm on both sides of the range.
5) brick masonry of the doors and Windows on both sides of the hole 450 mm to 200 mm and the corner of the range. Other masonry of the doors and Windows on both sides of the hole 600 mm to 300 mm and the corner of the range.
6) independent or attached to the wall brick column.