博文

目前显示的是标签为“scaffolding plank”的博文

Hot Galvanized Scaffolding Plank Manufacturers which the Cheapest?

      Hot galvanized scaffolding plank manufacturers which the cheapest? World  is the best Choice!   World scaffolding plank advantages:   1. Light: high-quality galvanized sheet after punching anti-skid waterproof anti-sediment more than the effect of reducing their weight, compared to traditional wood, bamboo, steel wireboard scaffolding plank more light.   2. Non-slip: Punching on the surface of the scaffolding plank to increase the friction, effective anti-skid.   3. Corrosion resistance: sheet surface galvanized, can better prevent rust corrosion and so on.   4. Fire: more difficult than the traditional scaffolding plank fire, more secure.   5. No water is not accumulated sand: scaffolding plank surface raised punching in most of the construction environment can be a good anti-sand sand against water.   6. High recovery value: 35% -40% after the retirement value of the recovery value

The Name of The Scaffolding Bar

1. Upright tube: it is a vertical bar that is perpendicular to a horizontal plane in a scaffolding. 2. Outside upright tube: it is the upright tube that is away from one side of the wall, or a single row of pole. 3. Inner upright tube: it is the upright tube that close to one side of the wall. 4. Angle bar: the pole at the corner of the scaffolding. 5. Duplex vertical pipe: two parallel to the pole. 6. The main pole: it is the pole that directly withstand the top load in duplex vertical pipe. 7. Deputy pole: it is the pole that shares the main pole load pole in duplex vertical pipe. 8. Horizontal tube: horizontal bar in scaffolding. 9. Longitudinal level bar: horizontal bar set vertically along the scaffold. 10. Transverse horizontal tube: Horizontal bar set horizontally along the scaffold. 11. Bottom horizontal tube: the horizontal bar that is close to the ground and connects the base of the pole. 12. Longitudinal bottom horizontal tube: Sweep bar set vertically along the scaffold. 1...

The Classification of Scaffolding

Scaffolding are a variety of stents those erected for workers to operate and solve the the vertical and horizontal transport on construction site, it is a class of architectural terminology, and it is a modern construction industry that widely used in a class of devices. Scaffolding is actually very rich in the type, generally according to different classification, the type of which is different. 1. According to the material of the bar: (1) Single gauge steel pipe scaffolding, it uses only one kind of scaffolding tube. (2) Scaffolding combined A variety of specifications scaffolding tube. It consists of two or more different specifications of scaffolding tube, such as frame scaffolding. (3) Steel-based scaffolding. That means the main of scaffolding is steel pipe, and supplemented by other types of steel rods, such as inside wall scaffolding with trough or pedestal, projecting scaffolding with connecting steel plate. 2. According to the fixed way and installation location ...

How does the steel industry participate in One Belt ,One Road

图片
As carbon steel pipe, welded steel pipe, line pipe, galvanized steel pipe,  scaffolding plank , and other products production services vendors, Shinestar think, remarkable "One Belt,One Road" all the way there is no doubt that will boost steel demand. So how does China's steel industry get involved in the country's "One Belt, One Road" construction? At present, "One Belt , One Road" international cooperation peak is being held in Beijing. The most fundamental purpose of the steel industry's participation in the "One Belt , One Road" initiative is to promote mutual benefit. Some areas may require a lot of steel, but lack of production capacity and technology, so China can develop the steel industry locally. As a result, the steel industry in the region has been developed, and Chinese steelmakers have benefited from investment, which is mutually beneficial. As the domestic and foreign markets become more and more connected, China's ...

How to Control the Risk When Using Scaffolding

图片
Scaffolding work means the erection, alteration and dismantling of a scaffold. Some examples of the hazards associated with work involving the erection, use, maintenance, alteration and dismantling of scaffolds include: · scaffolding collapse (before, during and after placement of the scaffold) · manual tasks. · work near overhead electric lines · mobile plant and other workplace traffic · mixing components from different scaffold systems (for example, do not mix aluminum tubing with steel tubing) · falls from heights · falling objects So how to control the risks,  world scaffolding  provide some suggestion. Using mechanical aids such as cranes, hoists, pallet jacks or trolleys to move equipment and materials wherever possible instead of manual lifting. Using concrete barriers to separate pedestrians and powered mobile plant to reduce the risk of collision. Providing a catch platform to prevent falling objects hitting workers or other persons below the work area. If risk remai...

WORLD SCAFFOLDING PRICE LIST ( FOB BASIS) CURRENCY USD2017.03.28

图片
Note:The price is only for reference.There will be a little change because of quantity and oeder tir.Any inquiry pls send to our e-mail: scaffolding@hunanworld.com A large quantity of favorably.We will offer the best price and delivery to you.Thanks.

What difference between welded and seamless scaffolding pipes

Many people are not very clear on the difference between an ordinary pipe and seamless one; in fact, from two names of these pipes can think of their main differences. Mainly forming in different process . Ordinary steel , such as water pipes , typically by bending a flat plate after welding together , you can find a seam in the above ; generally thicker diameter spiral weld. The molten steel seamless pipe generally molten through an annular slit and then stretched out the backlog of processing such as molding process , so there is no weld. In performance, especially compared with ordinary steel has greatly improved the bearing capacity, it is often being used for high-voltage equipment like hydraulic equipment such as piping connections . Ordinary steel pipe welds is weak linked , the weld quality of  scaffolding plank  is also a major factor in its overall performance impact. People who lived in the north in general have had water pipe or heating pipe burst in the winte...

Reduce the burden of enterprise: the way of reform is the fundamental

图片
Reduce the burden of enterprise: the way of reform is the fundamental China's fiscal science research institute, said at the annual meeting of the strategy of social science college of finance and economics to solve the existing problems of enterprise comprehensive heavy burden not only rely on lower taxes, must want to promote all aspects of system reform, Shinestar of iron and steel research institute agree with it. Cost just rely on existing lower taxes, such as tax cut, cut, such as social security contributions appropriate to these as phased measures can be, however, may not rely on lower taxes to make the enterprise profit. Enterprises in market competition to make money, in fact, depends on two aspects: one is the ability to create value. Second is the ability of cost control. At present, enterprise, industry and the economy as a whole are in a critical period of transformation and upgrading, climbing a camp, the firm's ability to create value is not strong, in...

WORLD SCAFFOLDING PRICE LIST ( FOB BASIS) CURRENCY USD2017.01.14

图片
Note:The price is only for reference.There will be a little change because of quantity and oeder tir.Any inquiry pls send to our e-mail :scaffolding@hunanworld.com A large quantity of favorably.We will offer the best price and delivery to you.Thanks. http://www.hunanworld.com/

The use of scaffolding plank

图片
The use of scaffolding plank Hunan World Scaffolding Co., LTD., South Korea's introduction of advanced production technology, production line operation, forming of hot dip galvanized steel springboard it has a very wide range of application fields, more and more get the favour of not just shipbuilding and ship repairing industry, current is platform construction, petroleum, chemical industry, electric power industry, the advantages of hot dip galvanized steel springboard and before the first generation, compared to the traditional wooden board has good fire prevention, high safety coefficient, compared with the second generation of stencil springboard, have anticorrosive performance is good, and before the second generation (wood, steel net) than besides has the advantages of anticorrosion, flameproof, more important is to have recycling value, years later after scrapping can sell them as scrap. Save forest resources to steel and wood is the inevitable trend of the spr...

The advantages of hot dip galvanized scaffolding plank

图片
The advantages of hot dip galvanized  scaffolding plank 1. Use of low cost: hunan hot dip galvanized steel springboard, use cost low, safety and reliability 2. Good safety performance: 1. The wooden plank easy cracking, corrosion, easy to burn, prone to accidents. Angle steel sheet is corrosion loss, hot dip galvanized steel springboard has corrosion resistance, fire, etc. 2. Our company produces the steel springboard to regulate the arrangement of convex molding hole, anti-slip coefficient is high, the effect is good. The springboard of stiffened plates on either side of the bow at the bottom of the design and strong welding more increased its strength, 3 meters long scaffolding can take 5-6 people standing at the same time and not deformation, durable. 3. Easy installation fast speed: the same scaffold board specifications, the weight of the wooden board is 1.5 2 times the weight of the steel scaffolding, and more heavy rain board after absorbing water, and extreme non-sli...

Scaffolding plank material requirements

图片
Scaffolding plank  material requirements Steel plank material requirements: material quality selection of Q235 galvanized material, thickness 1.5 mm, national standards allow between + 0.02 to 0.03. All products are carried out according to the national standards for production. Hot dip galvanized steel springboard is shipbuilding, repairing yard and the construction enterprise construction, industrial plant, boiler installation engineering building scaffolding used in a kind of form a complete set of tools. My company introduces foreign advanced "C steel punching machine automatic production lines, production speed is fast. Use hot dip galvanized steel springboard, build scaffolding steel pipe can be reduced, and improve the efficiency of building. Hot dip galvanized steel springboard has lower than wood board, use fixed number of year after secondary recovery 35% - 40% of the investment benefits, deeply the general shipbuilding, oil platforms, power, and was unanimously p...

Shinestar Group Passionately Presenting a Gift for 2017

图片
Shinestar Group Passionately Presenting a Gift for 2017 New year, new begin, new dream. Before the Chinese New Year comes, Shinestar Group to have care, support the construction and development of the group of all customers, partners, employees, and friends from all walks of life, with the most cordial greetings and best wishes! Thanks for the new and old customers for a long time support and companionship, Shinestar Group to start a season (from January 1, 2017 to March 31st) the huge promotion season for Chinese new year. We will offer a special gift to our clients with affordable products and thoughtful service at spring. Shinestar Group open huge promotion season for Chinese new year, in order to reciprocate the masses of customers and thanks for all who supported us in 2016. During the period of time, product discount ,a wide range of discounts and for a long time.Customers who purchase at Shinestar Group across the board any product can enjoy value huge promotion. ...

WORLD SCAFFOLDING PRICE LIST ( FOB BASIS) CURRENCY USD2016.12.20

图片
WORLD SCAFFOLDING PRICE LIST ( FOB BASIS) CURRENCY USD2016.12.20

How To Use An Scaffolding Ladder

How To Use An  Scaffolding Ladder Before even setting up the ladder, you should make sure that it is closed. Doing this will avoid injuries, such as your finger getting caught up on the rungs, or other parts, when you are opening up the extension of the ladder. The fly section of the ladder should be at the lower end, meaning that you should place it on the floor where you are going to open up the ladder. The fly section of the ladder is the side that actually moves. You can test the ladder, or you can extend...

How to maintain and repair the scaffolding metal plank?

图片
How to maintain and repair the scaffolding metal plank ? The first step is to check if there is any uneven sinking or odd material staging at the bottom of the scaffolding metal plank. Then to see if there is any vertical tolerance of the whole scaffolding frame and of the frame parts. Pay special attention to the vertical ratio around the scaffolding corners and ruptures. If any abnormal situations, take measure to reinforcing to eradicate the potential risks. The oil paint and fastening of all the couplers. When checking the couplers, first check the appearance and then loose the threads of the rods on the couplers anti-clockwise and the paint the couplers with oil to fasten them to required torque range. Finally, to check if the scaffolding metal plank has any loose, cantilever and also check the four corners are fastened with steel wires. If any problems found, make rectification and modification immediately. When checking the connection with buildings, check if the connectin...

Benefits of galvanized steel scaffold deck boards.

图片
·Light weight. 9”x 6ft scaffold plank weighs only 28.5 lbs. ·Non skid Perforated dimple tread design minimizes accidents in slippery conditions ·Fire resistant. Ideal for use where welding or burning is occurring ·Long term usage. Galvanized steel planks do not absorb water or chemicals ·Consistent strength. Plank load is not significantly affected by weather conditions ·Stackable design saves storage and transportation costs. ·Works with all styles of modular system and tube and clamp scaffold material ·Corrosion resistant.

Petro China and Malaysia has sighed Sabah Natural Gas Pipeline Project

图片
On the afternoon of November 1, 2016, under the witness of Premier Li Keqiang and Malaysian Prime Mnister Najib Razak, The deputy general manageer of China National Petroleum Corporation (CNPC) Liu Hongbin and the Chairman of Strategic Energy Co., Ltd of Sulia Mohammad Evan Seriga Abu, on behalf of the two companies, have dual signed the Contract for the Construction and Trail Operation of Sabah Gas Pipeline Project and the Contract for Construction and Commissioning of Multu-medium Pipeline Project in Beijing. Sabah gas pipeline and multi-media pipeline is the Malaysian federal government-led projects. Under the agreement, China Petroleum Pipeline Bureau will EPCC way to undertake the construction of these two pipeline projects.

The Components of Scaffolding

图片
Scaffolding , also called scaffold or staging, is a temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man made structures. Scaffolding is also used in adapted forms for formwork and shoring, grandstand seating, concert stages, access/viewing towers, exhibition stands, ski ramps, half pipes and art projects. There are four main types of scaffolding used worldwide today. These are Tube and Coupler (fitting) components, prefabricated modular system scaffold components, H-frame / facade modular system scaffolds, and timber scaffolds. Each type is made from several components which often include: ·A base jack or plate which is a load bearing base for the scaffold. ·The standard which is the upright component with connector joins. ·The ledger (horizontal brace). ·The transom which is a horizontal cross section load bearing component which holds the batten,board or decking unit. ·Brace di...

How to Check the Quality of Galvanized Steel Scaffolding Plank

图片
Steel board is a new type of portable scaffolding planks, is the modern construction, energy, chemical industry, shipbuilding and other large construction projects that is commonly used in construction tools, used in turn punching technology, than the old steel pedals one-third reduction in weight. Steel springboard quality directly affects the use effect, Although the new product use effect is good, but also should pay attention to when buying. 1. The appearance and the welding requirements: with visual inspection by quality inspection personnel. 2. The overall dimensions: use the steel tape measure. 3. Raw material requirements: each batch of steel springboard into the factory must have the material report, or inspection report issued by inspection agencies. 4. The plate deflection: testing platform. 5. Load intensity.