Design data structure: fastener type steel pipe scaffold poling set-up
Design data structure: fastener type steel pipe scaffold poling set-up
(1) it is strictly prohibited to 48 mm outside diameter mixed with 51 mm steel pipe used.
Docking fastener (2) adjacent stud shall not be in the same height, stagger distance should comply with the provisions of this specification.
(3) began to take to set up the rod should every 6 set across a brace, until a stable after installation, the wall shall be removed depending on the situation.
(4) when build to have even a point in the construction of the wall in the build-up of the stud finished here, longitudinal rod, lateral horizontal pole, should immediately set even a wall.
(5) the top vertical pole lap length and vertical bar at the top of the height of the building should comply with the rules.
(1) it is strictly prohibited to 48 mm outside diameter mixed with 51 mm steel pipe used.
Docking fastener (2) adjacent stud shall not be in the same height, stagger distance should comply with the provisions of this specification.
(3) began to take to set up the rod should every 6 set across a brace, until a stable after installation, the wall shall be removed depending on the situation.
(4) when build to have even a point in the construction of the wall in the build-up of the stud finished here, longitudinal rod, lateral horizontal pole, should immediately set even a wall.
(5) the top vertical pole lap length and vertical bar at the top of the height of the building should comply with the rules.
评论
发表评论